GXM1 - Sulphur Granulation Forming |
PREMIUM GRANULATION UNIT

THE WORLDS MOST TRUSTED
SULPHUR GRANULATION UNIT 

Over 30 years of Sulphur granulating experience has gone into the development of the Enersul GXM1™ unit. The cumulative effects of the various refinements, improvements and simplifications has resulted in a very safe and user-friendly process that is variable in its production capacity, has excellent process control and produces product of the highest quality. The GXM1™ has also been developed over the years to minimize operating and maintenance requirements while at the same time maximizing production

The Enersul GXM1™ Granulation Unit exceeds compliance standards with industry accepted premium product specifications to ensure the optimum size, shape, hardness and internal moisture of granules for handling and storage. The produced granules are spherical, between 2-6 mm in diameter, hard, dry and free from voids and structural weakness.

The GXM1™ process on top of being a safe, user friendly and industry proven process has also been engineered to minimize environmental emissions and impact.

Heat is absorbed from the solidifying Sulphur by the evaporation of water droplets and is removed from the GXM1™ drum by airflow. The exhaust air is cleaned in a wet scrubber to remove entrained Sulphur particles before being discharge to the atmosphere.

A screening process separates undersized granules (<2mm) from the product size granules, which allows the undersized granules to be recycled to the drum inlet as seeds and the process is repeated. This feedback loop screening process ensures that no undersized granules exit the system and end up in the downstream storage.

A constant production rate is maintained by the process control system, which compares the actual Sulphur flow rate into the granulator against the production rate set point and adjusts the pump speed accordingly.

DOWNLOAD SPEC BROCHURE

Sulphur granulation is a size enlargement process. Small sulphur seeds (undersized granules) are repeatedly coated with a liquid sulphur spray … Download Spec Brochure

Sulphur granulation is a size enlargement process. Small sulphur seeds (undersized granules) are repeatedly coated with a liquid sulphur spray and cooled. With repeated application of liquid sulphur, the seed increases in volume and weight. As the granule is enlarged, each coating of liquid sulphur is fully and structurally bonded to the layer beneath. This creates a spherical granule which is entirely dry and completely free of voids.

CONTACT ENERSUL

ABOUT THE GXM1TM

SINGLE PASS PREMIUM GRANULATION UNIT

The GXM1 NEXGENTM offers a new innovative approach to Enersul’s proven GXTM sulphur granulation process. … READ MORE

PREMIUM GRANULATION UNIT

The GXM1TM Sulphur Granulation Unit was developed for producers seeking the highest quality formed sulphur … READ MORE

MODULAR GRANULATION UNIT

Enersul’s GXM3™ is the first and only portable modular sulphur forming unit in the industry. The GXM3™ … READ MORE

logo

Find us on:


Head Office
7210 Blackfoot Trail S.E.
Calgary, Alberta, Canada T2H 1 M5
Telephone: 1+ (403) 253-5969
Facsimile: 1+ (403) 259-2771
Middle East Office
Telephone: +971 50 5853831

© 2019 Enersul Limited Partnership. All rights reserved.